Hicoat 89 is a hard, styrene acrylic emulsion polymer,
developed as a let down vehicle for flexographic, gravure
inks and OPV’s giving high gloss. It is suitable
for printing paper and board.
- Good resolubility
- Good gloss
- Fast drying
- Low odour
- Easy to clean up
||Semi Translucent Emulsion
|Brookfield Viscosity @ 25 oC (Mpas)
||250 - 400
|Flow time / FC No. 4 @ 25 oC (Seconds) [Sheen
make] as per ASTM D 1200
||50 - 75
|Solids % 105 oC / 90 Min
||46 ± 2
|Density gm / cc
||1.04 - 1.05
||7 - 8
||55 - 75
Hicoat 89 will be compatible with most water based styrene/acrylate
and acrylate polymers designed for flexographic and gravure
inks, coatings and offset OPV'S.
Available in 200kgs drums normally.
Store under cool, dry conditions. It is recommended that
the material should be used within 10
months of certification.